Process details
- Overview
- Pre-Heating with steam
- Crude palm oil level measurement
- Low level monitoring in pre-treatment reservoir
- Crude palm oil feed measurement
- Transferred heat monitoring
- Phosphoric acid treatment of crude emulsion
- Low level monitoring in pH-agent reservoirs
- Neutralization tank level measurement
- Level monitoring in acid and caustic treatment
- Caustic dosing
- Level monitoring in caustic day tank and raw caustic
- Neutralization tank level measurement
- Flow monitoring to centrifuge
- Secondary heating with steam
- Transferred heat monitoring
- Slop oil flow from separator monitoring
- Slop oil for further processing
- Hot water feed into final mixwer
- Degummed/neutralised oil for further processing
Continuous neutralisation in the palm oil production
Accurate Monitoring and Control of Acid and Alkali Dosages in Continuous Neutralisation
Crude palm kernel oil contains minor components that impart unique nutritional properties. The most relevant are tocopherols and tocotrienols (vitamin E) and carotenoids (α‐ and β‐carotene) – responsible for red colours.
Palm oil is generally refined by the physical process, in contrast to the chemical process (which is preferred) since high acidity (up to 5%) can lead to excessive loss of neutral oils in the soap-stock after alkali neutralisation.
Neutralisation is the second process in vegetable oil refining, which commences after the completion of de-gumming. The feedstock is taken into the neutralisers where the heating temperature is kept between 55 to 70C depending on the quality of the crude oil. The oil is constantly agitated to maintain uniformity.
The main purpose of neutralisation is to remove the Free Fatty Acids present inside the crude vegetable oils. In chemical refining, an alkali is used to neutralise the FFA and to remove the oil acidity.
Requirements
- For liquids, (wet) gases, saturated and superheated steam
- Flange or space-saving sandwich (wafer) version
Recommended products and solutions
Requirements
- Level control
Recommended products and solutions
Requirements
- Resistant to CIP and SIP agents
- Maintenance-free, can be installed in any position
Recommended products and solutions
Requirements
- Best-in-class price/performance ratio
- Optimised flow splitter for low pressure loss
Recommended products and solutions
Requirements
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- With optional temperature transmitter
Recommended products and solutions
Requirements
- Capacitive pick-up
- Measuring very low conductivity liquids (≥0.05 µS/cm)
Recommended products and solutions
Requirements
- Resistant to CIP and SIP agents
- Maintenance-free, can be installed in any position
Recommended products and solutions
Requirements
- Level control
Recommended products and solutions
Requirements
- Small dead zone and beam angle (8° with DN40 / 11⁄2″)
- Small dead zone and beam angle (8° with DN40 / 11⁄2″)
Recommended products and solutions
Requirements
- High accuracy (±0.05% flat), for precise pH-control
- Many optional sensor materials (incl. Duplex and alloy 22)
Recommended products and solutions
Requirements
- Resistant to CIP and SIP agents
- Maintenance-free, can be installed in any position
Recommended products and solutions
Requirements
- Level control
Recommended products and solutions
Requirements
- Process control
Recommended products and solutions
Requirements
- For liquids, (wet) gases, saturated and superheated steam
- Flange or space-saving sandwich (wafer) version
Recommended products and solutions
Requirements
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- With optional temperature transmitter
Recommended products and solutions
Requirements
- Maintains operation with air or gas entrainments in the medium
- Fast and completely digital signal processing
Recommended products and solutions
Requirements
- Many options e.g., heat tracing.
- Small meter sizes starting from DN08
Recommended products and solutions
Requirements
- Many outputs optional, such as 4…20 mA, pulse, frequency, status, HART®
- Meets potable water standards: ACS, DVGW, NSF, TZW, WRAS etc.
Recommended products and solutions
Requirements
- High accuracy mass, density and volume flow measurement
- Cost-effective twin straight tube Coriolis mass flowmeter